CB-1400 furnace

 

Model CB-1400
Ideal for small garages, shops, and workspaces the CB-1400 produces approximately 140,000 BTU/hr.

  

• Engineered from the ground up to burn used oils
• Patented heat exchanger generates more heat
• Unique non-welded flue tubes for longer service life
• Advanced burner preheats oil, regulates and optimizes combustion
• Swing-away burner and door make maintenance and service easy
• Longest cleaning interval of all units in its class
• Lower stack temperatures, higher heat output
• Automatic flow control means no fuel adjustment required
• Ideal for unit heating, or as part of a Clean Burn Recycling Center
• Unequaled service & support from your Clean Burn Distributor

CB-1400 Specifications

Maximum BTU/hour*
 140,000 (41 kW)
Maximum Oil Consumption*
 1.0 GPH (3.8 L/h)
Fuels
 
Used Oils
Crankcase, ATF, hydraulic
Fuel Oils
#2, #4, and #5 fuel oil
Airflow Output (CFM)
 
Unit Heater
1625
Air Compressor* (required)
2.0 CFM @ 20 PSI
(3.4 m3/h @ 1.4 bar)
Stack Size
8 inch dia. (203mm dia.)
Furnace Dimensions - assembled
40” L x 46" W x 30" H
(1016mm x 1168mm x 762mm)
Approximate Weight
343 pounds (154.4 kg)
Electrical Requirements
115 VAC 60 Hz, single phase
20 Amp circuit breaker
* Values indicated above are nominal. Actual values will vary depending on fuel and installation.

Furnace system includes: check valve and filter screen, in-line washable canister filter, barometric damper, wall thermostat and oil supply pump.
  DE-ON SUPPLY - 1-800-824-4115 - info@deonsupply.com