CB-1750 furnace

Model CB-1750
The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of used oil annually.

 

• Engineered from the ground up to burn used oils
• Patented heat exchanger generates more heat
• Unique non-welded flue tubes for longer service life
• Advanced burner preheats oil, regulates and optimizes combustion
• Swing-away burner and door make maintenance and service easy
• Longest cleaning interval of all units in its class
• Lower stack temperatures, higher heat output
• Automatic flow control means no fuel adjustment required
• Ideal for unit heating, or as part of a Clean Burn Recycling Center
• Unequaled service & support from your Clean Burn Distributor
CB-1750 Specifications
Maximum BTU/hour*
 175,000
Maximum Oil Consumption*
 1.2 GPH
Fuels
 
Used Oils
 Crankcase, ATF, hydraulic
Fuel Oils
 #2, #4, and #5 fuel oil
Airflow Output (CFM)
 
Unit Heater
 1625
Central furnace (ducted)
0.25 SPWC (in.)
 1500
0.30 SPWC (in.)
 1400
Air Compressor* (required)
 2.0 CFM @ 20 PSI
(3.4 m3/h @ 1.4 bar)
Stack Size
 8 inch dia. (203mm dia.)
Furnace Dimensions - assembled
 83” L x 29.25" W x 31.5" H
(2190mm x 743mm x 787mm)
Approximate Weight
 406 lbs. (182.7 kg)
Electrical Requirements
 115 VAC 60 Hz, single phase
20 Amp circuit breaker
* Values indicated above are nominal. Actual values will vary depending on fuel and installation.

Furnace system includes: check valve and filter screen, in-line washable canister filter, barometric damper, wall thermostat and oil supply pump.
  DE-ON SUPPLY - 1-800-824-4115 - info@deonsupply.com