CB-3500 furnace

Model CB-3500
The Clean Burn Model CB-3500 is an industrial grade used-oil furnace for service facilities with four or more bays and where larger quantities of used oil are generated or collected. The CB-3500 generates approximately 350,000 BTU/hr and is ULC-listed for use as either a unit heater or central (ducted) furnace. A Clean Burn Distributor is the expert you want for furnace selection and installation.

• Engineered from the ground up to burn used oils
• Patented heat exchanger generates more heat
• Unique non-welded flue tubes for longer service life
• Advanced burner preheats oil, regulates and optimizes combustion
• Swing-away burner and door make maintenance and service easy
• Longest cleaning interval of all units in its class
• Lower stack temperatures, higher heat output
• Automatic flow control means no fuel adjustment required
• Ideal for unit heating, or as part of a Clean Burn Recycling Center
• Unequaled service & support from your Clean Burn Distributor

CB-3500 Specifications
Maximum BTU/hour*
350,000 (102 kW)
Maximum Oil Consumption*
2.5 GPH (9.5 L/h)
Fuels
 
Used Oils
Crankcase, ATF, hydraulic
Fuel Oils
#2, #4, and #5 fuel oil
Airflow Output (CFM)
 
Unit Heater
4200
Central furnace (ducted)
0.25 SPWC (in.)
4000
0.40 SPWC (in.)
3900
Air Compressor* (required)
2.0 CFM @ 25 PSI
(3.4 m3/h @ 1.7 bar)
Stack Size
8 inch dia. (203mm dia.)
Furnace Dimensions - assembled
74” L x 35 " W x 61 " H
(1880mm x 889mm x 1549mm)
Approximate Weight
836 lbs. (376.2 kg)
Electrical Requirements
230 VAC 60 Hz, single phase
30 Amp circuit breaker
* Values indicated above are nominal. Actual values will vary depending on fuel and installation.

Furnace system includes:
check valve and filter screen, in-line washable canister filter, barometric damper, wall thermostat and oil supply pump.
  DE-ON SUPPLY - 1-800-824-4115 - info@deonsupply.com